XGP 500 Obtivision

ObstiVision ( XGP 338) A dedicated maintenance-free obstacle light for aviation warning purposes. Light emitting diode ( LED) technology is chosen to be the light source of this product. ObstiVision is suitable to be used as a Low Intensity, Type A obstacle light according to ICAO standards.Type B obstacle light with higher intensity is also available upon request. Product Compliance International Civil Aviation Organization ( ICAO) standards and recommended practices - Aerodromes Annex 14 Volume 1, 3rd edition, July 1999, Chapter 6 Federal Aviation Administration ( FAA) standard Main application Airfields Telecommunication towers Tall buildings Power transmission towers Features • Extremely long lamp life of 100, 000 hours • Energy savings of up to 95% • Quick pay-back period of 1 year or less Technical descriptions Mechanical • Yellow powder painted highpressure die-cast aluminium housing • Clear glass cover – 5mm thick • Stainless steel plate to support LED unit • Operating temperature = -40° C to + 70° C • IP65 • Wind load at 200 km/ hr of less than 40 Newton force • Threaded base for 1 inch in diameter size of pipe ( other size can be applied with the reducer or enlarger) XGP 338 Type Description Ordering Number XGP388 48Vdc A ObstiVision 48Vdc 9199 186 76132 XGP388 48Vdc AF ObstiVision 48Vdc with flasher 9199 186 76032 XGP388 220-240Vac A ObstiVision 220-240Vac 9199 186 77132 XGP388 220-240Vac AF ObstiVision 220-240Vac with flasher 9199 186 77032 ZGB388 48Vdc T Control box 48Vdc with timer 9199 186 72032 ZGB388 48Vdc P Control box 48Vdc with photo switch 9199 186 72132 ZGB388 220-240Vac T Control box 220-240Vac with timer 9199 186 72232 ZGB388 220-240Vac P Control box 220-240Vac with photo switch 9199 186 72332 ZGP388 TW3 3-way throughwiring junction box 9199 186 71032 ZGP388 TW4 4-way throughwiring junction box 9199 186 71132 ZPP388 Mounting Kit - pipe installation 9199 186 70032 ZVB388 Mounting Kit - building top installation 9199 186 70132 ZWB388 Mounting Kit - wall mounted installation 9199 186 70232 Standard execution in 220 volts, 50 Hz. Electrical • Standard type using nominal operating voltage of 48Vdc or 220-240Vac; 12 Vdc and 24 Vdc systems are available upon request • Terminal block for 2 x 1.5mm2 cables • Power consumption: 5W for 48Vdc version and 7W for 220 240Vac version • Constant current 100mA • Surge protection device integrated: according to Institute of Electrical and Electronics Engineers ( IEEE) requirement Optical • Luminous intensity of greater than 10 cd for low intensity type A obstacle light ( low intensity type B obstacle light is available upon request and has luminous intensity of greater than 32 cd) • Horizontal radiation coverage 360° • Vertical radiation coverage 50° • Color: aviation red, choice of fixed or flashed light Installation and mounting • Pipe installation: the standard luminaire comes with threaded base – ready to be installed with threaded pipe of 1 inch in diameter ( other size of pipe – use standard reducer or enlarger) • To attach ObstiVision with existing attenna / pipe or wall mounted installation, the mounting kit is required. Accessories • Control box • Photo switch and sensor • Mounting accessories ( please check with your local Philips agent) • 3-way and 4-way junction box for through-wiring • Solar cell